Article number: QP2A-X-AA
The Quark series offers a staggering array of options, accessories and interchangeability. With a wide range of LED, battery and clip choices, you get the features you want without compromise. Available in a Pro multi-mode interface or a Tactical interface with programmable primary and secondary outputs, these lights can be used in a wide variety of settings and applications. Waterproof and constructed with aircraft-grade aluminum and impact-resistant lenses, Quark lights are tough enough to meet any challenge.
Operating your Quark Pro is simple.
Make sure its batteries are inserted with the positive side (+) toward the head.
Ensure the bezel (the ‘head’ of the light) and tailcap are tightened, then depress the tailcap button fully so that it ‘clicks’ and the light turns on.
The two most commonly used modes are Max and Moonlight, the highest and lowest modes.
To access Max, you simply tighten the bezel.
To access Moonlight, you just loosen the bezel a half-turn. That’s it.
You can also cycle through the Quark’s other modes just as easily.
Lightly depress the button momentarily (you don’t need to ‘click’ it off) and the output will switch to the next mode.
The mode sequence is determined by whether the bezel is tightened or loosened.
Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max
Batteries AA x 2
Additional Battery Type AA Ni-mH x 2
Lamp Type Cree XM-L2 LED
Output/Runtime Maximum: 336 lumens (0.8 hrs),
High: 138 lumens (2.5 hrs), Medium: 28 lumens (20 hrs), Low: 3 lumens (3 days), Moonlight: 0.3 lumens (15 days)
Strobe/SOS Strobe, S.O.S and beacon mode
Reflector Orange peel
Lens Type Optical-grade glass lens with anti-reflective coating on both sides
Switch Type Reverse clicky tail switch and twist head
Construction Aircraft-grade Aluminum
Finish Type III HA
Tail Stand Yes
Pocket Clip Yes
Waterproofing IPX-8, 2m depth
Dimensions Length : 5.8 in, Diameter : 0.86 in
Weight 2.2 oz