Milsig HPA Airsoft gun. Milsig M6 utilizes completely different internals from any other airsoft gun - Milsig´s own, blow forward HeatCore™ system housed in D.E.R.P. (Dynamic Exo Retention Platform). HeatCore completely mechanical system is capable of shooting semi-auto and MECHANICAL full auto firing modes. Unlike other HPA airsoft guns on the market, M6 does NOT require an external inline regulator to operate - M6´s engine (HeatCore) has built in air regulator that will regulate the input air pressure down to it´s operating pressure.
Milsig HeatCore Engine
Completely different internals from any other airsoft gun - Milsig´s own, fully mechanical, HPA blow forward system.
Mechanical Semi and Full Auto firing modes
M6 is able to shoot in both semi-auto and full-auto firing mode. No batteries attached, both fire modes are mechanical. Full auto fures at 30RPS and is non-adjustable.
Adjustable Muzzle Velocity
Velocity can be adjusted from 90m/s to 140m/s (standard internals with 0,2BB). Includes velocity lock to comply with big game or local field limits.
Carbine upper receiver is made from one piece, CNC machined aluminium. Polymer lower is steel reinforced. Magwell with dual magazine release is made of durable polymer. All together it creates extremely durable, yet lightweight platform.
Hybrid Collapsible Stock
The Hybrid Collapsible Stock enables user to seamlessly switch between using a 13 cubic inch air cylinder or a remote line.
Standardized HOP Up Bucking / Nubbin
Your M6 uses a standard AEG (Airsoft Electric Gun) hop up bucking but does NOT use a nubbin. The factory standard is 75 degree hardness.
Standardized inner barrel:
M6 uses a standard AEG (Airsoft Electric Gun) inner barrel. The factory barrel is constructed of brass, with a length of 315mm, and an inner bore of 6.03mm.
Outer Barrel Threading:
M6 outer barrel uses airsoft industry standard 14mm negative threading.
M6 magazine follows the “TM” standard. Most aftermarket magazine made to this standard should fit your M6.*
Receiver Top Rail:
Your M6 Top Rail follows the MIL-STD 1913 standard. Any accessory made for this standard should fit your M6.
Foregrip Accessory Mounting:
Your M6 shroud the MLOK standard. Any accessory made for this standard should fit your M6.
M6 uses a Paintball / HPA Airsoft standard High Pressure Air Bottle / Regulator with 650-800psi output pressure.**
M6 uses a Paintball / HPA Airsoft standard remote line / ASA
|Length With HCS expanded||85,7cm|
|Length With HCS collapsed||71,8cm|
|Magazine Type||"TM" Standard Magazine*|
|Fire Modes||Safe, Semi Auto, MECHANICAL Full Auto|
|Full Auto Rate of Fire||30 bb per second (locked)|
- MILSIG M6 Carbine HPA Airsoft Gun
- 0,2/200bar (13ci/3000psi) PBS HP Air System (10/2015)
- 1 × Milsig HI-CAP 300BB Magazine
- Basic tool and parts kit
- Flip-up Sights
- Hybrid Car Stock (for use with 13ci Air System or Remote Coil)
- User manual